Search "TV wall mount installation cost" and you'll get a dozen different numbers, because the honest answer isn't one price — it's a range built from four variables: TV size, mount type, wall material, and whatever add-ons you tack on. Nationally, a professional TV mount runs anywhere from about $80 on the low end to $300+ on the high end, and most straightforward jobs land somewhere in the middle of that. Here's what actually moves the number, so you can tell a fair quote from an inflated one.
Four things set the final number on almost every job. TV size matters because bigger screens are heavier and awkward for one person to hold steady while drilling, so installers often need a second set of hands or extra time. Mount type matters a lot — a fixed mount just needs to go flush and level, while a full-motion mount has more hardware, more adjustment points, and needs to be checked for swing clearance. Wall material changes how long the anchoring step takes: drywall over studs is the fastest case, while brick, tile, concrete, or metal studs all require different hardware and more drilling time. And add-ons — hiding the cables inside the wall, mounting a soundbar, or moving an outlet — are usually priced separately from the base install because they're genuinely separate work.
These are general national ranges for labor and a basic mount, based on publicly available industry pricing data — your actual quote depends on your market and the specific provider.
| TV Size | Fixed Mount | Tilt Mount | Full-Motion Mount |
|---|---|---|---|
| 32"–50" | ~$80–$100 | ~$90–$120 | ~$110–$150 |
| 51"–65" | ~$100–$130 | ~$120–$150 | ~$140–$180 |
| 66"–75" | ~$130–$170 | ~$150–$190 | ~$180–$230 |
| 76"+ | ~$170–$220 | ~$190–$250 | ~$230–$300 |
General national ranges for labor plus a standard mount on drywall. Brick, concrete, or metal-stud walls typically add $30–$80 on top of these figures.
Wire concealment — running the power and HDMI cables inside the wall instead of letting them hang — is the most common add-on, and it usually adds $75–$150 depending on how far the cables have to travel and whether an in-wall power kit is needed. Mounting a soundbar underneath the TV at the same visit is a smaller add-on, often $30–$60, since the tech is already on the ladder with tools out. If you don't own a mount yet, factor that into your comparison too: a basic fixed mount is typically $20–$40, a tilt mount $30–$60, and a full-motion mount $60–$120, on top of installation labor — unless the installer bundles the hardware into a single flat price, which is worth asking about up front.
One more thing that affects your final cost isn't about the TV at all — it's how the provider prices the job. Some marketplaces price TV mounting by the hour, which means your total depends on how long the installer is actually at your house, plus service fees layered on top. Others, including dedicated mounting companies, quote a flat rate based on TV size, wall type, and mount before anyone shows up, so a slower-than-expected install doesn't change your bill. Flat-rate pricing is generally easier to budget against when you're trying to estimate TV wall mount installation cost ahead of time, since you know the number going in instead of finding out after the clock has been running.
Here's our own flat-rate pricing, so you can compare it directly against the ranges above. If you already own a mount, installation starts at $69. If you need us to supply and install a fixed/flat mount, the all-in price is $140. A full-motion mount installed is $180, with a $20 upcharge for TVs 65" and larger. Mounting on metal studs adds $30, and brick or stone adds $50 — drywall has no surcharge. Those numbers are the whole bill, not a starting estimate that grows once someone's on-site. You can run your exact setup through our instant price calculator to get a locked-in number in under a minute, or browse completed installs to see what's included at each price point.
TV wall mount installation cost really comes down to four levers — size, mount type, wall material, and add-ons — and a legitimate quote should be able to explain which of those is driving your number. If a quote feels high, ask specifically what's included: hardware, wire hiding, and wall-type surcharges are the usual places costs quietly get added. We run same-day flat-rate installs in Los Angeles and Phoenix, with the full price shown before anyone drives out.
Same-day service in LA and Phoenix · Free quotes · Real local techs